安装位置:根据需要。

Max：长度为6 000毫米，无接缝。

滑台安装:由t型槽。

单元安装:采用t型槽和安装装置。线性轴可以与任何t形槽形组合。

机架:6h23模2(硬化和研磨)，可重复性±0,1毫米。

支架支撑:在标准型号中，支架由8个滚轮支撑，可在中心维修位置进行调节和维修。对于较长的滑台，滚轮的数量可以增加

Fitting position: As required. Max. length 6.000 mm without joints. Carriage mounting: By T-slots. Unit mounting: By T-slots and mounting sets. The linear axis can be combined with any T-slot profi le. Rack: 6h23 Modul 2 (hardened and ground), repeatability ± 0,1 mm. Carriage support:  In the standard version, the carriage runs on 8 rollers which can be adjusted and serviced at a central servicing position. For longer carriages the number of rollers can be increased.

说明:该单元由一个矩形铝型材和两个集成的滚子导轨组成。型材装有可自由调节的线性滚珠轴承，由高精度机架沿导杆驱动。齿条和齿轮系统适用于高度动态伺服操作和理想的升降运动。小齿轮装有免维护的滚珠轴承。这个齿条是用一个有齿的毡轮润滑的

Function: This unit consists of a rectangular aluminium profi le with 2 integrated roller guides. The carriage, which has internal linear ball bearings that can be adjusted free of play, is driven along the guide rods by a high precision rack. The rack and pinion system is suitable for highly dynamic servo operation and ideal for lifting movements. The pinion is equipped with maintenance-free ball bearings. The rack is lubricated by a toothed felt wheel