安装位置:根据需要。

Max：长度4000毫米，无接缝。

滑台安装:由t型槽。

机组安装方式:采用t型槽或轴承座内的螺纹孔，安装机组。

带式:HTD带钢筋，改变方向无间隙

重复性精度：±0,1 mm。

Fitting position: As required.  Max. length 4.000 mm without joints. Carriage mounting: By T-slots. Unit mounting: By T-slots or tapped holes in the bearing block, mounting sets. Belt type: HTD with steel reinforcement, no backlash when changing direction, repeatability ± 0,1 mm.

功能说明:与ELZ功能相同，但每个滑台可以单独移动自己的驱动器。这个装置有两个滑轮，分别在不同的轴承上运行，还有两个独立的平行驱动带，每节滑台一个。

Function: Same functions as ELZ, but each carriage can be moved separately by its own drive. This unit has twin pulleys, which run on separate bearings, and two independent, parallel drive belts, one for each carriage.